TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 291 of 844

TM 9-2320-328-13&P-3

0369-3

DRAFT

0369

Change 1

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Perform Steps (1) through (6) to install wire rope on driver or passenger side discharge or

auxiliary inlet caps.

Passenger side inlet cap shown.

•

Wire rope needs to run through one side of swaging sleeve then back through other side

of swaging sleeve.

1.

Install two swaging sleeves (20) on wire rope (19).

2.

Crimp two swaging sleeves (20).

3.

Install two S-hooks (16) and (18) on wire rope (19).

4.

Install clip (14) on S-hook (18).

5.

Install S-hook (16) on cap (17).

6.

Install clip (14) on panel (15) with washer (13), lockwasher (12), and screw (11).

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3435