TM-9-2320-328-13-P-3
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3
MARCH 2009
TM-9-2320-328-13-P-3 - Page 50 of 844
TM 9-2320-328-13&P-3
0330-2
DRAFT
0330
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NOTE
•
Perform Steps (5) through (7) if deflectors need to be removed.
•
Both deflectors are removed the same way.
Driver side shown.
•
Note position of washers and deflectors prior to removal to ensure proper installation.
5.
Remove rear driver side light bezel cover (WP 0335).
6.
Remove three screws (15) and lockwashers (16) from deflector (17) and vehicle.
Discard lockwashers.
7.
Remove three nuts (18), lockwashers (19), six washers (20), screws (21), and deflector (17) from vehicle.
Discard lockwashers.
END OF TASK
INSTALLATION
NOTE
•
Perform Steps (1) through (3) if deflectors were removed.
•
Both deflectors are installed the same way.
Driver side shown.
•
Install deflectors and washers as noted prior to removal.
1.
Install deflector (17) on vehicle with three screws (21), washers (20), lockwashers (19), and nuts (18).
2.
Install three lockwashers (16) and screws (15) on deflector and vehicle.
3.
Install rear driver side light bezel cover (WP 0335).
HWT3118
Back to Top
