TM-9-2320-328-13-P-3
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3
MARCH 2009
TM-9-2320-328-13-P-3 - Page 49 of 844
TM 9-2320-328-13&P-3
0330-1
DRAFT
0330
FIELD LEVEL MAINTENANCE
HOSE BED DIVIDER REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
Number of fire hoses may vary.
1.
Remove all fire hoses (1) from hose bed compartment (2).
2.
Remove two nuts (3), lockwashers (4), washers (5), screws (6), and hose bed divider (7) from hose bed
divider bracket (8).
Discard lockwashers.
3.
Remove two screws (9), lockwashers (10), washers (11), and hose bed divider (7) from vehicle.
Discard
lockwashers.
NOTE
•
Perform Step (4) if hose bed divider bracket must be removed.
•
Screws to fasten hose bed divider bracket remain on vehicle.
4.
Remove two nuts (12), lockwashers (13), washers (14), and hose bed divider bracket (8) from vehicle.
Discard lockwashers.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
HWT0475
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0398, Item 17)
Materials/Parts
Lockwasher (2)
Lockwasher (2)
Lockwasher (2)
Lockwasher (3)
Lockwasher (3)
References
WP 0335
WP 0391, Fig. 74
Equipment Conditions
Engine OFF (TM 9-2320-422-10)
Wheels chocked (TM 9-2320-422-10)
Hose bed compartment door opened (WP 0008)
Back to Top
