TM-9-2320-338-10
TRUCK, CARGO, 8X8, M977A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-338-10 - Page 271 of 1120
•
If electrical power fails during crane operation, move switch on
REMOTE CONTROL UNIT to SHUTDOWN position. Failure to
comply may result in injury or death to personnel.
CAUTION
Boom must be above vehicle sides for clearance. Hitting side of vehicle
with boom may cause damage to boom or vehicle.
NOTE
Operate control levers with light, even pressure. Moving lever slightly will
cause slow movement of crane. Moving lever to full travel will cause faster
movement of crane.
1.
Move SWING control lever (1) to CW position to move boom (2) clockwise.
Back to Top
