TM-9-2320-338-10

TRUCK, CARGO, 8X8, M977A4

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-338-10 - Page 355 of 1120

OPERATOR MAINTENANCE

DRIVE VEHICLE FORWARD

INITIAL SETUP:

Not Applicable

PREPARE VEHICLE

NOTE

If vehicle has less than 500 miles (805 km), check controls and indicators

often during operation and listen for unusual noises or vibrations. Notify

field level maintenance of any problems.

1.

Remove and stow wheel chocks. (WP 0072)

2.

Ensure cargo body end panels are in place.

3.

Ensure cargo body side panels are secure. (WP 0037)

4.

Ensure grove crane, outriggers, and outrigger pads are secured in stowed position.

(WP 0038)

5.

Ensure all cargo in cargo body is secured.

6.

Adjust air-ride seat and mirrors as needed. (WP 0075)

7.

Adjust four-point seatbelt as needed. (WP 0076)

8.

Ensure air suspension dump valve control is pinned in ‘service’ position. (WP 0027)

9.

Ensure all four suspension ball valves are open. (WP 0043)

10. Ensure tire carrier is secure in raised position.

11. Start engine. (WP 0044)

12. Turn on lights as required.

TM 9-2320-338-10

0050

0050-1