TM-9-2320-338-10
TRUCK, CARGO, 8X8, M977A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-338-10 - Page 555 of 1120
OPERATOR MAINTENANCE
CONNECT/DISCONNECT SELF-RECOVERY WINCH CABLE TO ANOTHER VEHICLE
INITIAL SETUP:
Not Applicable
CONNECT CABLE TO VEHICLE
CAUTION
When attaching self-recovery winch cable to another vehicle, that vehicle
must be used only as an anchor point or damage to equipment can result.
NOTE
There are three tiedown rings on each side of vehicle.
1.
Unscrew one tiedown ring (1) from mounting plate (2).
Back to Top
