TM-9-2320-341-10
TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8 M983A4 LET
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-341-10 - Page 863 of 962
a.
Remove propeller shaft between transfer case and No. 3 axle.
b.
Install axle restraint chains (1):
3
2
1
4
Figure 2.
NOTE
•
Axle restraint chains are installed the same way, driver side
shown.
•
No. 2 axle should be restrained with chains on both sides of
vehicle.
(1) Route axle restraint chain (1) under engine shroud (2), over frame rail (3), and
around axle (4).
(2) Hook axle restraint chain (1) back into itself as shown.
(3) Repeat Steps (1) and (2) for opposite side of No. 2 axle (3).
END OF TASK
TM 9-2320-341-10
0136
0136-3
Back to Top
