3
3
FORWARD
Figure 3.
NOTE
Position jack 12 in. (30 cm) from end of equalizing beam. The jack
should be centered on apex as shown.
a.
If jack base plate (1) and jack (2) fit under apex of equalizing beam (3), skip to Step
(5).
b.
If jack base plate (1) and jack (2) DO NOT fit under apex of equalizing beam (3),
continue with Step (4).
4.
Drive flat/shredded wheel and tire assembly onto two wheel chocks (4).
TM 9-2320-341-10
0138
0138-4