TM-9-2320-342-10-1

TRUCK, WRECKER, 8X8 M984A4

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-342-10-1 - Page 1150 of 1428

PREPARE CRANE FOR OPERATION - Continued

NOTE

•

Failure of hydraulic system will stop crane operation and lock crane

in place. If hydraulic system fails during crane operation, refer to

perform immediate action for loss of hydraulic system. (WP 0131)

•

If electrical system fails during crane operation, refer to perform

emergency hydraulic operation when grove crane electrical power

fails. (WP 0132)

1.

Lower rear beacon lights to stowed position. (WP 0093)

2.

Start engine. (WP 0044)

NOTE

Grove crane can operate on up to 5 degree side slope.

3.

Position vehicle on level ground so all loading and unloading can be done from one

position.

4.

Set transmission range selector (1) to N (neutral).

NOTE

Dashboard parking brake indicator will illuminate when PARKING

BRAKE control is applied.

5.

Pull out PARKING BRAKE control (2).

TM 9-2320-342-10-1

0102

0102-2