REMOVE LIMP HOME FROM NO. 1 AND NO. 2 AXLE TIRES - Continued
2
1
Figure 7.
NOTE
•
If 7 ft. (2.1 m) chain can be disconnected, skip to Step (5).
•
If 7 ft. (2.1 m) chain is too tight to disconnect, continue with Step (3).
•
Removal of limp home setup No. 1 axle is shown. Removal of limp
home setup for No. 2 axle is done in same manner.
3.
Drive flat/shredded tire onto two wheel chocks (3).
TM 9-2320-342-10-1
0108
0108-7