TM-9-2320-342-10-1
TRUCK, WRECKER, 8X8 M984A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-342-10-1 - Page 1246 of 1428
INSTALL LIMP HOME SETUP ON NO. 3 AND NO. 4 AXLE TIRES - Continued
9
10
6
5
Figure 16.
7.
Unscrew jack ram (10) until it contacts transverse beam end casting (9), or is at full
extension.
NOTE
If axle cannot be jacked close enough to axle stop (2 in. [5 cm] or less)
to effectively install limp home setup, discontinue procedure and arrange
for vehicle recovery.
8.
Raise vehicle until axle (2) is as close as it will go to axle stop (3).
TM 9-2320-342-10-1
0108
0108-14
Back to Top
