INSTALL LIMP HOME SETUP ON NO. 3 AND NO. 4 AXLE TIRES - Continued
13.
Lower jack (6) and remove jack base plate (5) and jack (6) from under transverse
beam casting (9).
9
6
5
Figure 20.
14.
Return jack base plate (5) and jack (6) to stowage.
15.
Service (inflate) air suspension.
16.
Remove two wheel chocks (WP 0097) (4) from in front of and behind tire across (on
same axle) from tire in which limp home setup was installed.
4
Figure 21.
17.
Drive vehicle off two wheel chocks (1) and return wheel chocks (1) to vehicle stowage.
TM 9-2320-342-10-1
0108
0108-17