REMOVE LIMP HOME SETUP FROM NO. 3 AND NO. 4 AXLE TIRES - Continued
NOTE
•
If vehicle DID NOT require jacking, skip to Step (13).
•
If vehicle DID require jacking, continue with Step (11).
11.
Lower vehicle until jack (6) and jack base plate (5) can be removed from under
transverse beam casting (7).
7
6
5
Figure 30.
12.
Return jack base plate (5) and jack (6) to stowage.
TM 9-2320-342-10-1
0108
0108-24