TM-9-2320-342-10-1

TRUCK, WRECKER, 8X8 M984A4

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-342-10-1 - Page 710 of 1428

HOOKUP - Continued

32.

Operate retrieval system until tow cylinders (2) are fully retracted.

33.

Push in LIFT CYLINDER control lever to retract lift cylinder until slack is removed from

safety chains (28).

NOTE

Adjust slack in 16 ft. (5 m) safety chains so they do not touch the ground.

34.

Route two 16 ft. (5 m) safety chains (28) through safety chain hoop (29) on wrecker,

hook 16 ft. (5 m) safety chains (28) back into themselves, and secure grab hook (30)

with safety shackle (31).

29

28

31

30

28

7

1

Figure 14.

35.

Wrap two springs (1) around cross tube (7) and secure.

CAUTION

Make sure all cargo in bed of disabled vehicle is secured prior to lifting

and towing. Failure to comply may result in damage to cargo and

equipment.

36.

Prepare disabled vehicle for towing (refer to M35 operator's manual).

37.

Remove emergency tow lights (32) and two brackets (33) from wrecker stowage.

TM 9-2320-342-10-1

0069

0069-12