TM-9-2320-343-10

TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-343-10 - Page 1027 of 1128

OPERATOR MAINTENANCE

CHANGE WHEEL AND TIRE ASSEMBLY

INITIAL SETUP:

Tools and Special Tools

Chocks, Wheel (4) (WP 0161, Table 3,

Item 8)

Extension, Handle (WP 0161, Table 3,

Item 12)

Handle, Wrench (WP 0161, Table 3,

Item 14)

Jack, 12-ton, With Handle (WP 0161,

Table 3, Item 17)

Jack, Base Plate (WP 0161, Table 3,

Item 20)

Warning Device Set, Triangular (WP

0161, Table 3, Item 22)

Wrench, Wheel Lugnut (WP 0161,

Table 3, Item 32)

Wrench, Adjustable (WP 0161, Table

3, Item 30)

Personnel Required

Motor Transport Operator MOS 88M

(2)

PREPARE VEHICLE

1.

Shut off engine. (WP 0057)

WARNING

Park vehicle in safe area, out of traffic, where there is no danger to per-

sonnel changing tire assembly. Park vehicle on hard level ground. Failure

to comply may result in injury or death to personnel.

2.

Turn on emergency flashers. (WP 0071)

3.

Set up emergency marker kit, as necessary. (WP 0097)

END OF TASK

REMOVE SPARE WHEEL AND TIRE ASSEMBLY FROM TIRE CARRIER

NOTE

•

This procedure is a two soldier task.

TM 9-2320-343-10

0152

0152-1