TM-9-2320-343-10

TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-343-10 - Page 442 of 1128

6

5

4

7

8

Figure 15.

5.

Install two wheel chocks (WP 0072) (4) in front of and behind tire across (on same axle)

from tire in which limp home setup is being installed.

CAUTION

Jack placement is critical to avoid damaging vehicle suspension compo-

nents. Follow jack placement notes and procedures carefully. Failure to

comply may result in damage to equipment.

NOTE

Center jack on flat spot in center of transverse beam casting.

6.

Place jack base plate (5) and jack (6) under transverse beam casting (9).

TM 9-2320-343-10

0077

0077-12