TM-9-2320-343-10
TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-343-10 - Page 75 of 1128
OPERATOR MAINTENANCE
INTRODUCTION
SCOPE
This manual is used for operation and operator-performed maintenance of HEMTT series
vehicles which consist of a number of different models all built on similar chassis, but
specially equipped to perform different missions.
Table 1.
Overview.
M985A4 CARGO
DESCRIPTION
Figure 1.
Cargo vehicle with 71,000 lbs (32 234 kg) GVWR and
109,000 lbs (49 486 kg) GCWR. Vehicle is equipped with
material handling crane with 5,400 lbs (2 452 kg) load ca-
pacity at 16.5 ft. (5 m) boom radius and has 18 ft. (5.5 m)
cargo body.
MAINTENANCE FORMS AND RECORDS
Department of the Army forms and procedures used for equipment maintenance will be
those prescribed by DA PAM 750-8 The Army Maintenance Management System (TAMMS)
Users Manual. (WP 0160)
EQUIPMENT IMPROVEMENT REPORT AND MAINTENANCE DIGEST (EIR MD) AND
QUALITY DEFICIENCY REPORTING (QDR).
The quarterly TB 43-0001-62 (series) Equipment Improvement Report and Maintenance
Digest (WP 0160) contains valuable field information on equipment covered in this manual.
Information in the TB 43-0001-62 (series) Equipment Improvement Report and
Maintenance Digest (WP 0160) is compiled from some of the Equipment Improvement
Reports (EIR) that have been prepared on vehicles covered in this manual. Many of these
articles result from comments, suggestions, and improvement recommendations that were
submitted to the EIR program. TB 43-0001-62 (series) Equipment Improvement Report and
Maintenance Digest (WP 0160) contains information on equipment improvements, minor
alterations, proposed Modification Work Orders (MWOs), warranties (if applicable), actions
taken on some of the DA Form 2028's (WP 0160) (Recommended Changes to
TM 9-2320-343-10
0001
0001-1
Back to Top
