TM-9-2320-343-10

TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-343-10 - Page 889 of 1128

Table 1.

PMCS - AFTER - Continued

Item

No.

Interval

Item to

be

Checked

or

Serviced

Procedure

Equipment

Not Ready/

Available If:

overhead electrical lines.

Keep boom clear of all elec-

trical lines and other obsta-

cles while operating crane.

Failure to comply may result

in injury or death to personnel.

CAUTION

Do not hit outrigger leg with

hook block. Failure to comply

may result in damage to

equipment.

(6) Move BOOM control lev-

er to UP position until

hook is five to six feet

(1.5 to 1.8 m) above driv-

er side rear fender and

boom is approximately

45° above horizontal.

Boom does

not raise.

(7) Move MAST control lev-

er to UP position until the

mast is fully erect and

the cylinders are fully ex-

tended. Use BOOM con-

trol lever UP simultane-

ously as required to

maintain the boom at ap-

proximately 45° above

horizontal until the mast

is fully erect. Hold the

MAST control lever to

UP position for two to

three seconds after mast

is fully erect to ensure

Mast cylin-

der does not

raise com-

pletely be-

fore stop-

ping.

TM 9-2320-343-10

0144

0144-29