TM-9-2320-343-10

TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-343-10 - Page 900 of 1128

Table 1.

PMCS - AFTER - Continued

Item

No.

Interval

Item to

be

Checked

or

Serviced

Procedure

Equipment

Not Ready/

Available If:

trical lines and other obsta-

cles while operating crane.

Failure to comply may result

in injury or death to personnel.

CAUTION

Do not let cable become slack

or cable may get tangled on

drum.

(3) Move HOIST control lev-

er to UP position to take

up cable. Move BOOM

control lever to UP posi-

tion to raise boom.

Cable does

not reel in or

boom does

not raise.

(4) Move HOIST control lev-

er to DOWN position to

pay out cable. Move

BOOM control lever to

DOWN position to lower

boom to horizontal posi-

tion.

Cable does

not pay out

or boom

does not

lower.

CAUTION

•

Keep hook block at least

one ft. (30 cm) from end

of boom. If hook block hits

end of boom it may

damage cable or hook

block and crane will lose

power. Wait six seconds

for power and check

crane for damage.

TM 9-2320-343-10

0144

0144-40