TRANSFER CASE
The transfer case (1) connects the drivetrain to the No.1 and No. 2 axles (2) when 8-wheel
drive is needed.
2
1
Figure 4.
The transfer case has two gear ratios (high and low) and neutral. The vehicle must be
stopped before the transfer case can be shifted between ranges because the gears are not
synchronized.
Engagement of the transfer case in low range will automatically engage the drivetrain to the
front axles.
TANDEM AXLES AND SUSPENSION
Front and rear axles (1) are single reduction, full floating axle shaft type.
1
1
Figure 5.
The front two axles provide vehicle steering
The rear two axles are non-steering.
TM 9-2320-344-10
0011
0011-6