TM-9-2320-344-10
TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985A4GMT
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-344-10 - Page 243 of 1012
OPERATOR MAINTENANCE
HIAB CRANE OPERATION
INITIAL SETUP:
Not Applicable
PREPARATION FOR USE OF HIAB CRANE
WARNING
Vehicle should be parked clear of overhead power lines. Do not operate
crane near overhead power lines. If crane comes in contact with power
lines, injury or death to personnel may result.
CAUTION
Operator should be aware crane offers no interlocks to protect equipment
from damage in the event crane controls are moved while the crane is
folded. Never move crane controls other than those called out below while
crane is folded. Failure to comply may result in damage to equipment.
1.
Start engine. (WP 0040)
2.
Position vehicle on level ground so loading and unloading can be done from one
position.
3.
Set transmission range selector (1) to N (neutral).
TM 9-2320-344-10
0036
0036-1
Back to Top
