TM-9-2320-344-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985A4GMT

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-344-10 - Page 295 of 1012

9.

While holding outrigger leg (6), remove outrigger leg pin (11); then rotate outrigger leg

(6) to up position.

10. While holding outrigger leg (6), replace outrigger leg pin (11) and retainer lock (10) to

secure outrigger leg (6) in up position.

11. Remove outrigger beam retainer lock (12) and outrigger beam pin (13).

12. Push outrigger beam (14) in until it stops.

13. Install outrigger beam pin (13) and outrigger beam retainer lock (12).

14. Repeat Steps (8) through (13) for driver side outrigger.

SHUT DOWN CRANE AND VEHICLE

CAUTION

Operator should be aware crane offers no interlocks to protect equipment

from damage in the event crane controls are moved while the crane is

folded. Never move crane controls other than those called out below while

crane is folded. Failure to comply may result in damage to equipment.

1.

Set ENGINE HIGH IDLE ON/OFF switch (1) to OFF position.

TM 9-2320-344-10

0036

0036-53