8
9
Figure 5.
NOTE
The operator will notice a small amount of oil being expelled with the air
from the tire carrier pump each time it cycles, this is a normal condition.
7.
Press and hold power control (9). The tire carrier pump cyclic rate will be rapid at first,
and then slow noticeably. As cyclic rate slows, the operator should notice the tire carrier
begin to move.
CAUTION
Once tire is in contact with the ground, do not press power control with
directional control lever in LOWER (pointing outboard) position. This may
put undue stress on tire carrier. Failure to comply may result in damage
to equipment.
TM 9-2320-344-10
0037
0037-5