TM-9-2320-344-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985A4GMT

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-344-10 - Page 533 of 1012

45. Disconnect winch cable (9) from heavy object.

46. If snatch block was used, disconnect end of winch cable (9) from vehicle. (WP 0083)

Remove snatch block from winch cable (WP 0082) and tree, another vehicle, or heavy

object refer to FM 4-30.31. (WP 0143)

47. Set HYD ENABLE switch (2) to on position. MAIN HYD ENABLE indicator (3) will

illuminate.

48. Set winch shift lever (4) to IN.

49. When end of cable is near rear of vehicle, release winch shift lever (4) to center position.

50. Set HYD ENABLE switch (2) to off position. MAIN HYD ENABLE indicator (3) will go

out.

WARNING

•

Always wear protective gloves when handling winch cable. Never let

cable run through hands. Frayed cables can cut severely. Failure to

comply may result in injury or death to personnel.

•

Never operate winch with less than five wraps of cable on winch

drum. Failure to comply may result in injury or death to personnel.

51. Pull clevis (7) end of winch cable (9) forward through roller guide (13) and hole (12) in

fender.

TM 9-2320-344-10

0081

0081-33