TM-9-2320-344-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985A4GMT

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-344-10 - Page 536 of 1012

59. Assistant connects clevis (7) to tiedown ring (8) with pin (6) and cotter pin (5).

WARNING

Keep all personnel clear of area near winch cable when tension is on

cable. Failure to comply may result in injury or death to personnel.

60. Order all personnel to stand clear of area near winch (10).

CAUTION

Do not reel in winch cable too tightly. If too much tension is applied, cable

or tiedown ring can break, or winch may be damaged.

61. Once assistant and all other personnel are clear of area, move winch shift lever (4) to

IN and take all slack out of winch cable (9).

62. When cable is tight, release winch shift lever (4) to center position.

63. Set HYD ENABLE switch (2) to off position. MAIN HYD ENABLE indicator (3) will go

out.

64. Shut off engine. (WP 0053)

65. Push in hydraulic selector valve control.

TM 9-2320-344-10

0081

0081-36