TM-9-2320-344-10
TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985A4GMT
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-344-10 - Page 901 of 1012
a.
Remove propeller shaft between transfer case and No. 3 axle.
b.
Install axle restraint chains (1):
3
2
1
4
Figure 2.
NOTE
•
Axle restraint chains are installed the same way, driver side
shown.
•
No. 2 axle should be restrained with chains on both sides of
vehicle.
(1) Route axle restraint chain (1) under engine shroud (2), over frame rail (3), and
around axle (4).
(2) Hook axle restraint chain (1) back into itself as shown.
(3) Repeat Steps (1) and (2) for opposite side of No. 2 axle (3).
END OF TASK
TM 9-2320-344-10
0133
0133-3
Back to Top
