TM-9-2320-344-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985A4GMT

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-344-10 - Page 907 of 1012

OPERATOR MAINTENANCE

CHANGE WHEEL AND TIRE ASSEMBLY

INITIAL SETUP:

Tools and Special Tools

Chocks, Wheel (4) (WP 0144, Table 3,

Item 9)

Extension, Handle (WP 0144, Table 3,

Item 15)

Handle, Wrench (WP 0144, Table 3,

Item 17)

Jack, 12-ton, With Handle (WP 0144,

Table 3, Item 20)

Jack, Base Plate (WP 0144, Table 3,

Item 23)

Warning Device Set, Triangular (WP

0144, Table 3, Item 25)

Personnel Required

Motor Transport Operator MOS 88M

(2)

PREPARE VEHICLE

1.

Shut off engine. (WP 0053)

WARNING

Park vehicle in safe area, out of traffic, where there is no danger to per-

sonnel changing tire assembly. Park vehicle on hard level ground. Failure

to comply may result in injury or death to personnel.

2.

Turn on emergency flashers. (WP 0068)

3.

Set up emergency marker kit, as necessary. (WP 0094)

END OF TASK

REMOVE SPARE WHEEL AND TIRE ASSEMBLY FROM TIRE CARRIER

NOTE

•

This procedure is a two soldier task.

•

This procedure is not applicable when removing wheel and tire

assembly for maintenance purposes and installing same wheel and

tire assembly on vehicle:

TM 9-2320-344-10

0135

0135-1