TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 270 of 1184

29. Pull out PARKING BRAKE control (13) when BAP runners come onto LHS rear rollers,

and the BAP clears the ground.

NOTE

Dashboard HIGH IDLE indicator will go out when HIGH IDLE switch is

positioned off.

30. Set HIGH IDLE switch (19) to off position.

31. Hold joystick (20) in LOAD position until the BAP is loaded and NO TRANSIT indicator

light (26) is off.

WARNING

When NO TRANSIT indicator is illuminated, vehicle may be maneuvered

in the immediate vicinity of the loading/unloading site. However, vehicle

is unsafe for road travel. Do not perform open-road driving when NO

TRANSIT indicator is illuminated. Failure to comply may result in injury

or death to personnel and damage to equipment.

32. Release joystick (20) when main frame and hook arm are fully stowed, and NO

TRANSIT indicator light (26) is off.

CAUTION

While maneuvering vehicle in the immediate vicinity of the loading or un-

loading site, LHS MODE SELECT switch may be in any setting. However,

LHS MODE SELECT switch must be set to OFF prior to road travel, to

prevent damage to main frame and hook arm cylinders.

33. Turn LHS MODE SELECT switch (16) to OFF.

34. Set HYD ENABLE switch (16) to off position. MAIN HYD ENABLE indicator (17) will go

out.

35. Ensure hold-down locks (11) have handles pushed in to lock BAP to vehicle.

TM 9-2320-346-10

0038

0038-12