TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 282 of 1184

NOTE

Dashboard HIGH IDLE indicator will illuminate when HIGH IDLE switch

is positioned on.

11. Set HIGH IDLE switch (18) to on position.

12. Move joystick (19) to UNLOAD and hold while LHS hook arm rises and moves the BAP

to the rear.

NOTE

Dashboard parking brake indicator will go out when PARKING BRAKE

control is released.

13. Push in PARKING BRAKE control (1) and release service brake pedal (2) when back

edge of the BAP touches the ground.

14. Continue unloading while allowing vehicle to roll forward.

15. Release joystick (19) when front end of the BAP is about 1 ft. (30 cm) off the ground.

NOTE

Dashboard HIGH IDLE indicator will go out when HIGH IDLE switch is

positioned off.

16. Set HIGH IDLE switch (18) to off position.

17. Move joystick (19) to UNLOAD and continue unloading until the BAP rests on the ground

and weight of load is off LHS hook (23).

TM 9-2320-346-10

0039

0039-10