TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 304 of 1184

2 in. (6.7 m) above the loading area. Failure to conduct a site survey

could cause the vehicle to slip, turn over, crash into an obstruction,

or contact power lines. Failure to comply may result in injury or death

to personnel.

•

Unloading the BAP without disengaging hold-down locks may result

in injury or death to personnel.

•

Water velocity should not be greater than 8 ft. (2.4 m) per second.

Refer to TM 5-5420-290-12 for water velocity requirements for all

launch conditions. Failure to comply may result in injury or death to

personnel.

1.

A site survey must be conducted to ensure the site meets the criteria cited in the warning

above.

OPERATION

NOTE

•

This procedure is a two soldier task.

•

In case of emergency while the remote control is in use, push the

emergency stop switch to shut down operation of the LHS.

1.

Secure the BAP to the LHS. Ensure both BAP hold-down lock handles (1) are pushed

in.