TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 369 of 1184

Table 2.

BAP Hold-Down Locks Checklist.

- Continued

Load

BAP

From

Ground

(Note 8)

Unload

BAP

to

Groundl

Transport

Mode

(Note 8)

Transloa

d

BAP to

Trailer

Transload

BAP to

Vehicle

(Note 8)

Notes:

1.

Refer to figure below for location of BAP hold-down locks on vehicle.

BAP HOLD-DOWN

LOCKS

SHOWN WITHOUT BAP INSTALLED

FOR CLARITY

Figure 2.

2.

UP position is locked on the BAP, DOWN position is locked on the LHS hook

arm.

3.

Jaw and latch are located on pin locks.

4.

Not applicable for empty BAP.

5.

IN for empty BAP.

6.

Moved to UP position after the BAP is fully loaded onto trailer.

7.

Moved to STOWED position after the BAP is fully loaded onto vehicle.

8.

Bail bar lock and pin must be installed on LHS hook when BAP is loaded on

LHS.

TM 9-2320-346-10

0046

0046-5