TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 362 of 1184

NOTE

Dashboard HIGH IDLE indicator will illuminate when HIGH IDLE switch

is positioned on.

24. Set HIGH IDLE switch (17) to on position.

WARNING

When NO TRANSIT indicator is illuminated, vehicle may be maneuvered

in the immediate vicinity of the loading/unloading site. However, vehicle

is unsafe for road travel. Do not perform open-road driving when NO

TRANSIT indicator is illuminated. Failure to comply may result in injury

or death to personnel and damage to equipment.

25. Move joystick (18) to load and stop when NO TRANSIT (26) indicator light goes out.

NOTE

Dashboard HIGH IDLE indicator will go out when HIGH IDLE switch is

positioned off.

26. Set HIGH IDLE switch (17) to off position.

NOTE

Dashboard parking brake indicator will go out when PARKING BRAKE

control is released.

27. Push in PARKING BRAKE control (1) or release service brake pedal (2).

28. Set transmission range selector (3) to D (drive), and move vehicle 10 ft. (3 m) from

trailer.

NOTE

Dashboard parking brake indicator will illuminate when PARKING

BRAKE control is applied.

29. Pull out PARKING BRAKE control or apply service brake pedal (2).

NOTE

If BAP hold-down locks do not engage, raise the BAP slightly and lower

again. The BAP should seat completely and engage BAP hold-down

locks.

TM 9-2320-346-10

0045

0045-12