3-13. AIR CLEANER SERVICE
(Contd)
(4)
Turn two latches (6) to Up posi-
tion and lower hood right side panel (7).
(5)
Unfasten three clamps (9) and
pull shell (5) away from head (10) and
out of engine compartment.
(6)
Remove filter element (11) from
shell (5).
c. Installation.
(1)
Install filter element (11) in shell
(5).
(2)
Aline shell (5) with head (10),
and secure with three clamps (9).
(3)
Raise hood right side panel (7)
and lock in position by moving two
latches (6) to down position.
TM 9-2320-361-10
WARNING
Compressed air used for
cleaning purposes will not
exceed 30 psi. Use only with
effective chip guarding and
personal protective equipment
(goggles/shields, gloves, etc).
(7)
Clean filter element (11) by
tapping lightly or use compressed air to
loosen and remove dirt.
(4)
Install rain hood (8) on shell (5)
and tighten screw (3) and nut (2) on
clamp (4).
3-19