TM 9-2320-361-20
14-22. CARGO BODY PERSONNEL HEATER FUEL LINE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
MATERIALS/PARTS
TM 9-2320-361-20P
Lockwasher
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-361-10).
1. Close fuel shutoff valve (10).
2. Disconnect fuel line (13) and elbow (12) from tee (11).
3. Disconnect fuel line (2) from shutoff valve (10).
4, Remove shutoff valve (10) and tee (11) from fuel tank (9).
5. Remove nut (4), lockwasher (5), screw (15), two clamps (6), wiring harness (7), and fuel line (2) from
front cargo body panel (8). Discard lockwasher (5).
6. Remove sleeve (16) from fuel line (2) and hole (3) in cargo body floor (14).
7. Disconnect fuel line (2) from heater fuel pump (l).
8. Straighten fuel line (2) and pull from cargo body floor (14).
1. Install fuel line (2) through hole (3) in cargo body floor (14).
2. Bend fuel line (2) and connect to heater fuel pump (1).
3. Place sleeve (16) on fuel line (2) and install in hole (3).
4. Install tee (11) and shutoff valve (10) on fuel tank (9).
5. Connect fuel line (2) to shutoff valve (10).
6. Connect elbow (12) and fuel line (13) to tee (11).
7. Install fuel line (2) and wiring harness (7) on front cargo body panel (8) with two clamps (6),
screw (15), new lockwasher (5), and nut (4).
8. Open fuel shutoff valve (10).
14-32