TM 9-2320-361-20
Table 2-2. Mechanical Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 5. Check fuel pump discharge.
a. Remove fuel line from fuel pump output (para. 14-4).
b. Use clean container for fuel discharge recovery.
c. Position heater control box to RUN position.
d. If fuel pump fails to pump adequate amount of fuel, 1/2-pint (0.24 liter) in 30 seconds,
replace (para. 14-4).
Step 6. Inspect exhaust system for restrictions.
If exhaust pipe is restricted or damaged, repair or replace (para. 14-6).
Step 7. If fuel burning heater still fails to operate, replace fuel burning heater (para. 14-2).
Step 8. Check for proper operation of defroster and heat diverter control cables
(TM 9-2320-361-10).
If control cables or vent are broken, replace (paras. 11-40 and 11-41).
END OF TESTING!
2-51