TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 751 of 1207
TM 9-2320-361-20
11-30. FRONT FENDERS MAINTENANCE (Contd)
I
b. Inspection and Repair
I
1. Inspect fender for rust, dents, bends, and cracks.
2. Refer to para. 2-5 for general inspection procedure.
3. Refer to TM 9-237 for welding instructions.
4. Refer to TC 9-510 for metal body repair.
5. Refer to TB 43-0213 for rustproofing isntructions.
NOTE
Assistant will help with step 1.
1.
2.
3.
4.
5.
6.
7.
Install fender mount spacer (24), new anti-squeak material (1), and fender (13) on cowl (4) and
fender support (21) with three new screw-assembled lockwashers (16), springs (27), nine
washers (23), screws (26), and new locknuts (22). Do not tighten locknuts (22) or screw-assembled
lockwashers (16).
Install brace (18) on frame (5) and fender (13) with new screw-assembled lockwasher (19),
screw (17), and new locknut (14). Do not tighten screw-assembled lockwasher (19) or locknut (14).
Install two screws (15), washers (2), and new locknuts (3) on brace (20) and fender (13). Do not
tighten locknuts (3).
Install fender (13) to light support bracket (10) with two screws (7), washers (6), and new
locknuts (12). Do not tighten locknuts (12).
Install fender (13) to light support bracket (10) with three washers (9), screws (8), washers (9), and
new locknuts (11). Do not tighten locknuts (11).
NOTE
Assistant will help with step 6.
Aline fender (13) with cowl (4), brace (20), support (21), and light support bracket (10). Tighten
screw-assembled lockwashers (16) and (19) and locknuts (22), (3), (11), (12), and (14).
Install wiring harness (25) on fender support (21) with two clamps (29), screws (30), and new
locknuts (28).
11-54
Back to Top
