TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 830 of 1207

TM 9-2320-361-20

12-28. FILTER SEPARATOR-TO-SUMP PIPE REPLACEMENT (M49A2C)

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

M49A2C

MATERIALS/PARTS

Two gaskets

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20P

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

Fuel tanks drained (TM 9-2320-361-10).

GENERAL SAFETY INSTRUCTIONS

Keep fire extinguisher nearby when working on fuel

tank trucks.

WARNIN G

Do not perform this procedure while smoking or within 50 feet of

sparks or open flame. Fuel is flammable and can explode easily,

causing injury or death to personnel and damage to equipment.

a. Removal

Remove four screws (2), nuts (5), two couplings (3), filter separator-to-pump pipe (1), and two gaskets (6)

from sump valve housing (4) and filter separator (7). Discard gaskets (6).

b. Installation

Install two new gaskets (6) and filter separator-to-sump pipe (1) on sump valve housing (4) and filter

separator (7) with two couplings (3), four screws (2), and nuts (5).

FOLLOW-ON TASK: Fill fuel tanks (TM 9-2320-361-10) and check for leaks.

12-47