TM-9-2320-361-20

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

OCTOBER 1991

TM-9-2320-361-20 - Page 869 of 1207

TM 9-2320-361-20

12-53. DELlVERY PUMP REAR PROPELLER SHAFT MAINTENANCE (M49A2C, M50A3)

This task covers:

a. Removal

c. Installation

b. Inspection

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

M49A2C, M50A3

Parking brake set (TM 9-2320-361-10).

MATERIALS/PARTS

Discharge tube cover removed (M50A3 only)

(para. 12-46).

Two keys

Delivery pump front propeller shaft removed

REFERENCES (TM)

(para. 12-51).

TM 9-2320-361-10

GENERAL SAFETY INSTRUCTIONS

TM 9-2320-361-20P

Keep fire extinguisher nearby when working on fuel

tank trucks

WARNIN G

Do not perform this procedure while smoking or within 50 feet of

sparks or open flame. Fuel is flammable and can explode easily,

causing injury or death to personnel and damage to equipment.

1. Remove setscrew (5) and intermediate shaft (6) from delivery pump rear propeller shaft (8).

2. Remove key (7) from intermediate shaft (6). Discard key (7).

3. Remove setscrew (3) and delivery pump rear propeller shaft (8) from delivery pump shaft (2).

4. Remove key (1) from delivery pump shaft (2). Discard key (1).

Inspect U-joints (4) for wear or damage. Replace U-joints (4) if worn or damaged (para. 7-4).

1. Install new key (1) in delivery pump shaft (2).

2. Install delivery pump rear propeller shaft (8) on delivery pump shaft (2) with setscrew (3).

3. Install new key (7) in intermediate shaft (6).

4. Install intermediate shaft (6) on delivery pump rear propeller shaft (8) with setscrew (5).

12-86