TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 811 of 1176

TM 9-2320-361-24-1

0115 00

0115 00-1/2 blank

REMOVAL

NOTE

• Vehicle with auxiliary power outlets and personnel heaters

have two additional circuit breakers located next to horn

circuit breaker. Replacement procedures are the same for all

circuit breakers.

• Prior to removal, tag all lead wires for installation.

1.

Disconnect wires (1) and (5) from circuit breaker (2).

2.

Remove two screws (4) and circuit breaker (2) from firewall (3).

INSTALLATION

1.

Install circuit breaker (2) on firewall (3) with two screws (4).

2.

Connect wires (1) and (5) to circuit breaker (2).

3.

Connect battery ground cable (WP 0126 00).

4.

Lower and secure hood (TM 9-2320-361-10).

6.

Check operation of horn and personel heater (TM 9-2320-361-10).

7.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

FIELD MAINTENANCE INSTRUCTIONS

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)

CIRCUIT BREAKER REPLACEMENT

REMOVAL AND INSTALLATION

INITIAL SETUP:

Applicable Models

All

Equipment Condition

Parking brake set and wheels chocked

(TM 9-2320-361-10).

Hood raised and secured (TM 9-2320-361-10).

Battery ground cable disconnected

(WP 0126 00).

END OF WORK PACKAGE

~

1

2

3

4

5