TM-9-2320-361-24-2
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2
AUGUST 2006
TM-9-2320-361-24-2 - Page 1068 of 1144
TM 9-2320-361-24-2
0467 00
0467 00-20
MAINTENANCE ALLOCATION CHART (MAC) (Contd)
(1)
REF.
CODE
(2)
NOMENCLATURE
(3)
NATIONAL STOCK
NUMBER
(4)
TOOL NUMBER
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Replacer, Valve Guide: Install Valve Guides
(Used w/5120-00-8713513 Remover)
Compressor Assembly, Valve: Compressing Valve
Springs or Rotors while Engine is in Vehicle
Puller Kit, Mechanical: Crankshaft Pulley
(Used w/5120-00-870-6914 Adapter: Crankshaft
Gear, Camshaft Gear, Compressor, or Water Pump
Pulley)
Plug, Mechanical Puller
(Used w/5120-00-338-6721 Puller) (Adapter)
Extractor, Screw, Threaded Insert: Helical Insert,
Flywheel Housing
Replacing Tool, Engine: Exhaust Valve Seat Insert
Reamer, Hand: Intake and Exhaust Valve Guides
Replacer, Valve Guide
(Used w/5120-00-871-3513 Valve Guide Remover)
Remover and Replacer Kit, Bushing: Camshaft
Bearings
Extractor, Coil Threaded Insert: Helical Threaded
Insert, Oil Filter (7/16- to 1-in. Thd Size)
Inserter, Screw Threaded Insert: Helical Threaded
Insert, Oil Filter (1-14 Thd)
Tester, Fuel Injector Nozzle
Crowfoot Attachment (Used for tightening injector
line nuts at injection pump head)
Stand, Fuel Injector Test
Fixture: Holding Camshaft
Puller, Mechanical Bearing Plate: Spider Assembly
(Used w/5120-00-793-5048 Puller)
Remover and Replacer Plunger Locks: Removing
Camshaft from Housing: Replacing Bearing on
Camshaft: Replacing Spider Weight Assembly on
Camshaft: Removing Weight Assembly from
Camshaft (Used w/5120-00-793-5048 Puller)
Cap, Valve
Gauge Set, Pressure Dial Indicating: Fuel Pressure
Test
Adapter, Mechanical Puller: Reverse Idler Gear
(Used w/5120-00-313-9496 Puller)
10899158
10951361
8708724
10899178
1227-6
11642006
12254220
11642004
10899154
64595
535-16
3YFL
11642001
DFP-156
10899172
10882818
10882856
10882854
5704365
7083254
TM 9-2320-361-24-2
0467 00
0467 00-20
Table 2. Tool and Test Equipment Requirements (Contd).
Back to Top
