TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 219 of 1144

TM 9-2320-361-24-2

0248 00

0248 00-1/2 blank

FIELD MAINTENANCE INSTRUCTIONS

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)

PERSONNEL HEATER AIR VENT REPLACEMENT

REMOVAL AND INSTALLATION

INITIAL SETUP:

Applicable Models

All

Materials/Parts

Four lockwashers (item 225, WP 0470 00)

References

WP 0249 00

Equipment Condition

Parking brake set and wheels chocked

(TM 9-2320-361-10).

Hood raised and secured (TM 9-2320-361-10).

Battery ground cable disconnected

(WP 0126 00).

REMOVAL

1.

Loosen clamp (4) and remove supply hose (1) from air vent (9).

2.

Loosen screw (8) and remove cable (5) from shaft (2) and clamp (3).

3.

Remove two nuts (6), lockwashers (7), screws (12), lockwashers (11), and air vent (9) from

firewall (10). Discard lockwashers (7) and (11).

INSTALLATION

1.

Install air vent (9) on firewall (10) with two new lockwashers (11), screws (12), new

lockwashers (7), and nuts (6).

2.

Insert cable (5) through clamp (3) and install on shaft (2) with screw (8).

3.

Install supply hose (1) on air vent (9) with clamp (4). Tighten clamp (4).

4.

Adjust control cable (WP 0249 00).

5.

Connect battery ground cable (WP 0126 00).

6.

Lower and secure hood (TM 9-2320-361-10).

7.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

~

4

5

6

7

8

9

1

10

11

12

3

2

END OF WORK PACKAGE