TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 222 of 1144

TM 9-2320-361-24-2

0249 00

0249 00-2

PERSONNEL HEATER CONTROL CABLES REPLACEMENT (Contd)

REMOVAL

1.

Loosen screw (6) and remove cable (7) from shaft (5) and clamp (4) on diverter (3).

2.

Loosen screw (16) and remove cable (8) from shaft (18) and clamp (19) on adapter (17).

3.

Remove two nuts (1), lockwashers (2), screws (10), and bracket (9) from instrument panel (15).

Discard lockwashers (2).

4.

Remove nut (13), lockwasher (11), and cable (8) from bracket (9). Discard lockwasher (11).

5.

Remove nut (14), lockwasher (12), and cable (7) from bracket (9). Discard lockwasher (12).

INSTALLATION

1.

Install cable (7) in bracket (9) with new lockwasher (12) and nut (14).

2.

Install cable (8) in bracket (9) with new lockwasher (11) and nut (13).

3.

Install bracket (9) to instrument panel (15) with two screws (10), new lockwashers (2), and

nuts (1).

4.

Insert cable (8) through clamp (19) and install on shaft (18) of adapter (17).

5.

Insert cable (7) through clamp (4) and install on shaft (5) of diverter (3).

ADJUSTMENT

1.

Loosen screw (16) and slide cable (8) through clamp (19).

2.

Push shaft (18) of adapter (17) forward and tighten screw (16).

3.

Loosen screw (6) and slide cable (7) through clamp (4).

4.

Push shaft (5) of diverter (3) to the right, and tighten screw (6).

5.

Connect battery ground cable (WP 0126 00).

6.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).