TM-9-2320-361-24-2
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2
AUGUST 2006
TM-9-2320-361-24-2 - Page 31 of 1144
TM 9-2320-361-24-2
0192 00
0192 00-1
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
STEERING GEAR REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
All
Tools and Special Tools
General mechanic’s tool kit
(item 116, WP 0469 00)
Torque wrench, 1/2-in. drive
(item 136, WP 0469 00)
Materials/Parts
Four locknuts (item 145, WP 0470 00)
Four lockscrews (item 185, WP 0470 00)
Screw-assembled lockwasher
(item 249, WP 0470 00)
Tiedown strap (item 40, WP 0468 00)
References
WP 0193 00
Equipment Condition
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Hood raised and secured (TM 9-2320-361-10).
Battery ground cable disconnected
(WP 0126 00).
Steering wheel removed (WP 0196 00).
Horn cable removed (WP 0113 00).
Turn signal control removed (WP 0102 00).
Airbrake hand control valve removed
(if installed) (WP 0178 00).
Front winch propeller shaft removed
(if installed) (WP 0346 00).
Fuel injection pump removed (WP 0069 00).
Pitman arm removed (WP 0191 00).
Steering gear drained (WP 0020 00).
WARNING
Steering gear is heavy. Support steering gear during removal
and installation. Failure to do so may result in injury to
personnel or damage to equipment.
Back to Top
