TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 426 of 1144

TM 9-2320-361-24-2

0311 00

0311 00-2

115-VOLT RECEPTACLE REPLACEMENT (Contd)

REMOVAL

NOTE

Prior to removal, tag lead wires, terminals, and cables for

installation.

1.

Remove cap (1), clip (2), and cover (3) from base (5) on van wall (4).

2.

Remove two screws (7) from receptacle (6) and retainers (8).

3.

Pull receptacle (6) away from van wall (4).

4.

Loosen three screws (10) and remove six wire leads (9) from receptacle (6).

5.

Remove receptacle (6) from van wall (4).

6.

Remove two retainers (8) from base (5).

INSTALLATION

1.

Install two retainers (8) on base (5).

2.

Install six wire leads (9) on receptacle (6) by tightening three screws (10).

3.

Install receptacle (6) on two retainers (8) with two screws (7).

4.

Install cover (3), clip (2), and cap (1) on base (5).

5.

Connect battery ground cable (WP 0126 00).

6.

Place safety switch in ON position (TM 9-2320-361-10).

7.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).