TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 431 of 1144

TM 9-2320-361-24-2

0313 00

0313 00-1/2 blank

FIELD MAINTENANCE INSTRUCTIONS

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)

115-VOLT WIRING HARNESS REPLACEMENT

REMOVAL AND INSTALLATION

INITIAL SETUP:

Applicable Models

M185A3, M109A3

Tools and Special Tools

General mechanic’s tool kit

(item 116, WP 0469 00)

Electrical tool kit (item 114, WP 0469 00)

Materials/Parts

Electrical tape (item 43, WP 0468 00)

Equipment Condition

Parking brake set and wheels chocked

(TM 9-2320-361-10).

Battery ground cable disconnected

(WP 0126 00).

115-Volt receptacles removed (WP 0311 00).

NOTE

Both 115-volt receptacle wiring harnesses are replaced the same way.

This procedure covers one harness.

REMOVAL

NOTE

Prior to removal, tag lead wires, cables, and terminals for installation.

1.

Remove electrical tape from connectors (4).

2.

Cut receptacle wiring harness (3) from main wiring harness (1) at connectors (4).

3.

Remove receptacle wiring harness (3) from receptacle strip (2).

INSTALLATION

1.

Place receptacle wiring harness (3) in receptacle strip (2).

2.

Connect receptacle wiring harness (3) to main wiring harness (1) at connectors (4).

3.

Wrap connectors (4) with electrical tape.

4.

Install 115-volt receptacles (WP 0311 00).

5.

Connect battery ground cable (WP 0126 00).

6.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

END OF WORK PACKAGE

1

2

4

3

4