TM-9-2320-361-24-2
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2
AUGUST 2006
TM-9-2320-361-24-2 - Page 454 of 1144
TM 9-2320-361-24-2
0315 00
0315 00-18
115- AND 24-VOLT WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION (Contd)
24.
Install nut (2) and wires (3) and (4) on safety switch box (1) with capnut (5).
25.
Back out nut (2) to tighten leads (3) and (4) against capnut (5).
26.
Install two wires (6) on fuse block (8) and tighten two screws (7).
27.
Insert wires (18) and (25) through nipple (23) and into multibreaker box (10).
28.
Insert wire (27) through nipple (23), multibreaker box (10), nipple (9) and into blackout
switch (26).
29.
Insert wires (24) through nipple (23), multibreaker box (10), nipple (9), and into blackout
switch (26).
30.
Install wire (21) on multibreaker box (10) with screw (22).
31.
Insert opposite end of wire (21) through nipple (9) and into blackout switch (26).
32.
Position wire (18) in multibreaker box (10) and tighten screw (19).
33.
Position wires (25) and (14) in multibreaker box (10) and tighten screw (28).
34.
Insert wire (20) in bridge (15) and tighten screw (17).
35.
Install three wires (12) on multibreaker box (10) with three screws (13).
36.
Insert four wires (11) in bridge (15) and tighten four screws (16).
8
6
7
7
6
5
4
3
2
1
Back to Top
