TM-9-2320-361-24-2
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2
AUGUST 2006
TM-9-2320-361-24-2 - Page 493 of 1144
TM 9-2320-361-24-2
0324 00
0324 00-1/2 blank
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
24-VOLT CIRCUIT BREAKER REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
M185A3, M109A3
Materials/Parts
Two lockwashers (item 245, WP 0470 00)
Equipment Condition
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Battery ground cable disconnected
(WP 0126 00).
REMOVAL
1.
Disconnect two wires (4) from circuit breaker (3).
2.
Remove two nuts (1), lockwashers (2), screws (5), and circuit breaker (3) from van body (6). Discard
lockwashers (2).
INSTALLATION
1.
Install circuit breaker (3) on van body (6) with two screws (5), new lockwashers (2), and nuts (1).
2.
Connect two wires (4) to circuit breaker (3).
3.
Connect battery ground cable (WP 0126 00).
4.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
END OF WORK PACKAGE
1
2
3
4
5
6
~
Back to Top
