TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 500 of 1144

TM 9-2320-361-24-2

0327 00

0327 00-2

EXHAUST BLOWER SWITCH REPLACEMENT (Contd)

END OF WORK PACKAGE

1

2

3

6

4

5

7

8

7

11

10

9

7

8

12

13

REMOVAL

1.

Remove fourteen screws (13) from converter front panel (3) and converter (6).

2.

Turn screw (9) and open door (10). Pull converter front panel (3) away from converter (6).

3.

Remove two screws (1), exhaust blower switch (4), and identification plate (2) from converter front

panel (3).

NOTE

Prior to removal, tag all lead wires for installation.

4.

Remove three screws (8), lockwashers (7), resistor (5), and two wires (11) and (12) from exhaust

blower switch (4). Discard lockwashers (7).

INSTALLATION

1.

Install wire (12) on exhaust blower switch (4) with new lockwasher (7) and screw (8).

2.

Install resistor (5) and wire (11) on exhaust blower switch (4) with two new lockwashers (7) and

screws (8).

3.

Install exhaust blower switch (4) and identification plate (2) on converter front panel (3) with two

screws (1).

4.

Install converter front panel (3) on converter (6) with fourteen screws (13).

5.

Close door (10) and turn screw (9).

6.

Install converter (WP 0328 00).

7.

Connect battery ground cable (WP 0126 00).

8.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).