TM-9-2320-361-24-2
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2
AUGUST 2006
TM-9-2320-361-24-2 - Page 506 of 1144
TM 9-2320-361-24-2
0330 00
0330 00-2
VAN BODY TOOL REPLACEMENT (M185A3) (Contd)
COMPRESSOR REMOVAL
1.
Remove wingnut (14), washer (15), and lockwasher (16) from compressor mounting base (12),
Discard lockwasher (16).
2.
Remove wingnut (2), two lockwashers (1), screw (4), ground strap (3), and lockwasher (1) from
compressor mounting base (12) and angle (5). Discard lockwashers (1).
3.
Remove top cabinet drawer (38) and two screws (7) from cabinet (6).
4.
Remove compressor (13), two nuts (11), washers (10), lockwashers (9), and block (8) from
cabinet (6). Discard lockwashers (9).
VICE AND MACHINE SWIVEL BASE REMOVAL
Remove four nuts (39), lockwashers (40), screws (35), washers (37), and vice and machine swivel
case (34) from table (20). Discard lockwashers (40).
FIRE EXTINGUISHER BRACKET REMOVAL
1.
Remove fire extinguisher (36) from fire extinguisher mounting bracket (31).
2.
Remove four nuts (29), washers (30), screws (17), lockwashers (18), and fire extinguisher mounting
bracket (31) from van body wall (19). Discard lockwashers (18).
GRINDING MACHINE REMOVAL
Remove four wingnuts (27), lockwashers (28), screws (33), washers (32), and grinding machine (26) from
table (20). Discard lockwashers (28).
DRILL AND STAND REMOVAL
Remove four nuts (25), washers (24), screws (22), lockwashers (23), and drill and stand (21) from
table (20). Discard lockwashers (23).
DRILL AND STAND INSTALLATION
Install drill and stand (21) on table (20) with four new lockwashers (23), screws (22), washers (24), and
nuts (25).
GRINDING MACHINE INSTALLATION
Install grinding machine (26) on table (20) with four screws (33), washers (32), new lockwashers (28),
and wingnuts (27).
FIRE EXTINGUISHER BRACKET INSTALLATION
NOTE
Assistant will help with step 1.
1.
Install fire extinguisher mounting bracket (31) on van body wall (19) with four new
lockwashers (18), screws (17), washers (30), and nuts (29).
2.
Install fire extinguisher (36) on mounting bracket (31).
VICE AND MACHINE SWIVEL BASE INSTALLATION
Install vice and machine swivel base (34) on table (20) with four washers (37), screws (35), new
lockwashers (40), and nuts (39).
Back to Top
