TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 688 of 1144

TM 9-2320-361-24-2

0387 00

0387 00-2

DEEP WATER FORDING KIT REGULATOR VALVE REPLACEMENT (Contd)

REMOVAL

WARNING

Do not disconnect air lines before draining air reservoirs. Small

parts under pressure may shoot out with high velocity, causing

injury to personnel.

1.

Remove hose (5) from elbow (4) on engine compartment firewall (1).

2.

Remove tube (8) from regulator valve (7).

3.

Remove regulator valve (7) from coupling (6).

4.

Remove elbow (4), nut (3), lockwasher (2), coupling (6) from firewall (1). Discard lockwasher (2).

INSTALLATION

NOTE

Wrap male pipe threads with antiseize tape prior to

installation.

1.

Install coupling (6) and elbow (4) on firewall (1) with new lockwasher (2) and nut (3).

2.

Install regulator valve (7) on coupling (6).

3.

Install tube (8) on regulator valve (7).

4.

Install hose (5) on elbow (4).

5.

Start engine (TM 9-2320-361-10) and allow air pressure to build up to normal operating range;

check for air leaks.

6.

Connect battery ground cable (WP 0126 00).

7.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

END OF WORK PACKAGE

4

5

3

2

1

6

7

8